About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Ordered Dirt. Received Dirt. Would Buy Again.

At a 1 inch depth, one cubic yard of this sand covers about 324 square feet, and most mortar mixing or paver joint work only calls for a thin 1 to 2 inch layer, not a full bed. For a small paver patio or pool base topping, figure your square footage first, then divide by 324 to get a rough cubic yard count before rounding up. Because it is sold by the cubic yard, ordering in whole or half yard increments is usually easiest to schedule and place.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Chula Vista Sand Delivery

Chula Vista Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Ordered Dirt. Received Dirt. Would Buy Again.

At a 1 inch depth, one cubic yard of this sand covers about 324 square feet, and most mortar mixing or paver joint work only calls for a thin 1 to 2 inch layer, not a full bed. For a small paver patio or pool base topping, figure your square footage first, then divide by 324 to get a rough cubic yard count before rounding up. Because it is sold by the cubic yard, ordering in whole or half yard increments is usually easiest to schedule and place.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Chula Vista Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Mason sand pairs naturally with pavers, natural stone, and block for wall or patio builds, and many jobs also need a base layer of crushed rock or road base underneath it for stability. If you are setting a pool or spa pad, a compactable base material below the sand layer is worth having on site before the sand truck arrives.

Mulch Mound Pro Tip

Mason sand is finer and more uniform than concrete sand, which is exactly why it works for mortar and joint filling but is a poor choice under pavers as a full bedding layer. If you are building a paver patio here, consider clean chip stone as bedding instead, since it locks together and will not pump up through the joints the way sand can after Chula Vista's occasional heavy winter rain events.

Mulch Mound Pro Tip

A common mistake on pool decks and patios is overfilling joints with dry sand and expecting it to lock in permanently. Sweep it in dry, compact with a plate compactor over the pavers, then sweep a second pass to top off low spots. Skipping the compaction step is why joint sand often washes out or settles within the first season.

Mulch Mound Pro Tip

Since alluvial soil in this area already has plenty of fine sediment, do not substitute onsite soil or leftover fill sand for mason sand in mortar mixes, the grain consistency matters for workability and strength. Order mason sand specifically for mortar and joints, and save washed concrete sand or base rock for structural fill needs.

Working With Sand in Chula Vista

Chula Vista sits on alluvial soil that already holds a lot of fine sediment, which is part of why sand for joints and bedding needs to be clean and uniform rather than whatever is underfoot. With hardscape work running spring through fall here, most orders come in ahead of paver patios, retaining block projects, and pool deck bases tied to the area's active outdoor building season. The mild frost window, with a first frost around December 10 and last frost near February 1, means there is no real freeze heave to worry about, so joint sand stays put once it is swept in and compacted. A lot of the demand near the Elite Athlete Training Center corridor is smaller residential hardscape, patios and paver walkways, where mason sand is used for jointing rather than as a full bedding layer.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as regular sand from a hardware store bag?

Not quite. This is washed and finely screened mason sand, more uniform in grain size than bagged all purpose sand, which is what makes it workable for mortar and tight paver joints. Buying it by the cubic yard also works out far more practical than bags once a project needs more than a few cubic feet.

Answer

How much sand do I need for a 200 square foot patio's joints?

Joint filling uses much less material than a full bedding layer. At a 1 inch reference depth, one cubic yard covers about 324 square feet, but joints only take a fraction of that volume across the whole patio. Most 200 square foot paver jobs need well under a cubic yard just for joint sand, so a half yard order is often plenty.

Answer

When is the best time to schedule a hardscape project with sand delivery in Chula Vista?

Spring through fall is peak hardscape season here, when most patio and paver work happens. There is no real winter freeze to worry about locally, with frost only a brief risk between December and early February, so timing is more about contractor schedules and your own project plans than the weather itself.

Answer

Where will the sand be placed on delivery day?

The truck places the load at a single accessible spot, usually a driveway or curbside area, since we do not carry material into backyards. Make sure there is clear space for the truck to pull up and enough room for the pile, and let us know at checkout if access is tight.

Answer

Should I use mason sand or chip stone under my pavers?

For paver bedding specifically, many installers now prefer clean chip stone over sand, since it locks together and will not pump up through joints over time the way sand can. Mason sand is still the right call for the joints themselves and for mortar mixing, so a lot of jobs end up using both materials for different parts of the build.

More delivery around Chula Vista, California

All Chula Vista, California landscape supply