• Corcoran CA Sand Delivery - Mulch Mound
  • Corcoran CA Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and typical install depth runs 1 to 2 inches depending on whether it is bedding, joint fill, or mortar mixing. For a paver patio or walkway, figure your square footage against that coverage number and round up rather than short yourself mid job. Since it is sold by the cubic yard, measure your area first and we will help size the load from there.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Corcoran Sand Delivery

Corcoran Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and typical install depth runs 1 to 2 inches depending on whether it is bedding, joint fill, or mortar mixing. For a paver patio or walkway, figure your square footage against that coverage number and round up rather than short yourself mid job. Since it is sold by the cubic yard, measure your area first and we will help size the load from there.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Corcoran Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Most sand orders in Corcoran show up alongside base rock or crushed aggregate for paver prep, and sometimes with chip stone if the design calls for a bedding layer that will not pump under foot traffic. If you are mixing mortar on site, having both sand and the binding material delivered together saves a second trip and keeps the crew moving.

Corcoran Soil Delivery
Corcoran Mulch Delivery
Map of the sand delivery area around Corcoran, California

Service area

Areas we deliver sand in Corcoran, California

See All Locations
Mulch Mound Pro Tip

In Corcoran's clay loam, do not lay mason sand straight onto graded native soil and call it a base. The clay will hold moisture underneath and the sand layer can shift or sink unevenly over a season. Compact a proper aggregate base first, then screed the sand layer on top at a consistent 1 inch depth for pavers. This two layer approach is what actually holds up here, especially with the seasonal moisture swings this old lake bed area sees.

Mulch Mound Pro Tip

A common mistake we see locally is using this sand as the entire bedding layer for a paver patio and wondering why joints wash out after irrigation. Mason sand is fine and uniform, which is great for mortar, but under pavers it can migrate with water movement. Many crews here now use chip stone for the bedding layer and reserve mason sand strictly for joint fill and mortar mixing, which holds up better long term.

Mulch Mound Pro Tip

Hardscape season in Corcoran runs spring through fall, and ordering your sand alongside base rock in one delivery cuts down on truck trips and staging time. If you are mixing mortar for a masonry project, order a bit more than your calculated volume, since dry sand measures differently once it is wetted and worked, and running short mid mix is a bigger delay than having a little extra on site.

Working With Sand in Corcoran

Corcoran sits on the old Tulare Lake bed, and the clay loam soil here holds water and shifts with the seasons, which is exactly why builders avoid setting pavers or mixing mortar directly against native ground. Mason sand gives a stable, drainable layer that does not swell and crack the way the local clay can. With frost not settling in until late November and clearing by late February, there is a long working season here for patios, walkways, and pool decks. Farming Capital or not, most of the sand orders we see in this area are going toward hardscape, not row crops.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as concrete sand or mortar sand?

This is mason sand, which is finer and more uniformly screened than concrete sand. That finer texture is what makes mortar workable for masonry joints. If your project calls for structural concrete mixing, concrete sand is the better fit, but for mortar, paver joints, and pool bases, this washed sand is the right material.

Answer

How much sand do I need for a paver patio in Corcoran?

One cubic yard covers about 324 square feet at a 1 inch depth. Measure your patio's square footage, decide if you need it for bedding or just joint fill, and size your order from there. Most paver jobs use a thinner joint fill layer, so you will need less than a full bedding depth would require.

Answer

When is the best time to install sand for hardscape projects here?

Spring through fall is peak hardscape season in Corcoran, with a long frost free window from late February to late November. That gives plenty of dry working days for mortar mixing and paver setting. Avoid scheduling major hardscape work right around the first frost window if you are mixing mortar, since cold can affect cure time.

Answer

Where will the delivery truck place the sand on my property?

The driver places the load wherever you direct on delivery day, so pick an accessible spot close to your work area beforehand. Sand is heavy and awkward to move twice, so a driveway or staging area near the patio, pool deck, or masonry site works best. Delivery timing is scheduled at checkout, not assigned automatically.

Answer

Should I use this sand or chip stone under my pavers?

Many crews in this area have shifted to chip stone for paver bedding because it locks together and does not pump or migrate under moisture, which is a real concern in Corcoran's clay loam soil. Mason sand still works well for joint fill and mortar mixing. If you are unsure which fits your specific project, tell us the application and we can help you decide.

More delivery around Corcoran, California

All Corcoran, California landscape supply