About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, which is the typical install range for joint filling and bedding work, usually 1 to 2 inches. For mortar mixing, the yardage math changes since you're blending it into a batch rather than spreading it flat, so figure that separately based on your mix ratio. Most residential paver or pool base jobs in Santa Rosa run somewhere between half a yard and two yards.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Santa Rosa Sand Delivery

Santa Rosa Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, which is the typical install range for joint filling and bedding work, usually 1 to 2 inches. For mortar mixing, the yardage math changes since you're blending it into a batch rather than spreading it flat, so figure that separately based on your mix ratio. Most residential paver or pool base jobs in Santa Rosa run somewhere between half a yard and two yards.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Santa Rosa Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Mason sand pairs naturally with pavers, flagstone, or brick when you need a bedding layer under the hardscape. If you're setting a pool deck, many Santa Rosa contractors are shifting to clean chip stone for the base layer since it does not pump the way sand can, but sand still does the joint fill work well. Keep a bag of polymeric jointing sand on hand for a final surface pass if you want the joints locked in tighter.

Mulch Mound Pro Tip

Mason sand's fine, uniform grain is what makes mortar workable, but that same fineness means it holds water longer than coarser sand. In Santa Rosa's wet winters, if you're storing a pile outside for a spring project, cover it with a tarp or it'll be heavy and clumpy when you finally mix it, throwing off your water ratio and weakening the batch.

Mulch Mound Pro Tip

A common mistake on paver jobs is using mason sand as the structural bedding layer under the pavers themselves. It's too fine for that and tends to shift or pump moisture up through the joints over time. Save mason sand for the joint fill on top and use a coarser bedding sand or clean chip stone underneath, which several Santa Rosa contractors are now doing specifically because it resists pumping.

Mulch Mound Pro Tip

If your project spans both mortar work and joint filling, order everything as one delivery instead of two smaller runs. Sand keeps fine on site if it's kept dry, so there's no downside to having a little extra on hand for touch ups later, and it saves you a second delivery fee down the line.

Working With Sand in Santa Rosa

Santa Rosa sits on alluvial soil, which drains fine on its own but is not what you want under a paver base or mixed into mortar. That's where mason sand comes in, it gives you a clean, controlled material instead of relying on native soil. With hardscape season running spring through fall here, most of our sand orders are tied to patios, pool surrounds, and masonry work that needs consistent grain size to set up right. The native alluvial ground is fine for planting beds, but it has too much variation for structural sand work.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as regular sand for a sandbox or fill dirt project?

No, mason sand is washed and screened to a fine, uniform grain specifically for mortar mixing and paver joints. It's not meant for fill or grading work, where a coarser or cheaper fill material makes more sense. If you need general fill, ask about a different product before ordering sand.

Answer

How many cubic yards do I need for a 200 square foot patio joint fill?

At a 1 inch depth, one cubic yard covers about 324 square feet, so a 200 square foot patio would need well under a yard, roughly 0.6 yards. Most people round up slightly to cover uneven spots and waste, so ordering a full yard is a safe buffer.

Answer

When is the best time to install sand for a paver project in Santa Rosa?

Spring through fall is peak hardscape season here, and it's ideal since the ground is drier and easier to work with. Avoid the wet winter months if you can, since damp sand is harder to spread evenly and mortar mixes get unpredictable when the sand's already holding extra moisture.

Answer

Where will the sand be dropped and do I need to be home?

The load gets placed at the driveway or curb location you specify at checkout, so you don't need to be home if access is clear. Just make sure the drop spot is reachable by a delivery truck and free of parked cars or obstacles on delivery day.

Answer

Should I use mason sand or chip stone under my pavers?

For the bedding layer under pavers, many Santa Rosa contractors have shifted to clean chip stone since it doesn't pump or shift with moisture the way sand can. Mason sand still works well for filling the joints on top once the pavers are set, so the two materials often get used together on the same job.

More delivery around Santa Rosa, California

All Santa Rosa, California landscape supply