• Salinas CA Sand Delivery - Mulch Mound
  • Salinas CA Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, which is the low end of the typical 1 to 2 inch install range. For paver joints or mortar mixing you will use far less volume than that, since it is going into gaps and batches rather than a full spread, so measure your joint area or your mortar recipe before ordering a full yard.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Salinas Sand Delivery

Salinas Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Hannah
Hannah
Google Review

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, which is the low end of the typical 1 to 2 inch install range. For paver joints or mortar mixing you will use far less volume than that, since it is going into gaps and batches rather than a full spread, so measure your joint area or your mortar recipe before ordering a full yard.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Salinas Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review

Complete Your Outdoor Project

Most sand orders in Salinas go out alongside pavers or a load of gravel base material for the sub grade. If you are doing a pool deck or patio, a clean chip stone bedding is worth asking about too, since it is increasingly used in place of sand under pavers because it will not pump out over time.

Salinas Soil Delivery
Salinas Mulch Delivery
Map of the sand delivery area around Salinas, California

Service area

Areas we deliver sand in Salinas, California

See All Locations
Mulch Mound Pro Tip

This sand is finer and more uniform than concrete sand, which is exactly why mortar mixed with it stays workable long enough to set block or brick without fighting the trowel. If you are mixing mortar on site in Salinas, keep the pile covered between batches, coastal fog rolls in overnight and can add unexpected moisture that throws off your water ratio the next morning.

Mulch Mound Pro Tip

A common mistake is using this sand as full paver bedding under heavy foot traffic areas. It compacts fine at first but can shift and pump moisture over time, especially with any irrigation nearby. Many contractors now use it only for joint fill and switch to a clean chip stone for the bedding layer itself, since the chip stone locks together and does not migrate.

Mulch Mound Pro Tip

Order sand and paver base gravel together when you can, since both are project driven purchases and combining a delivery saves a second truck trip through Salinas traffic near Highway 101. If your project spans mortar work and joint fill, order slightly more than your calculated volume, leftover sand stores fine in a covered bin for the next small job.

Working With Sand in Salinas

Salinas sits on alluvial loam, soil that drains reasonably well but is not something you build a patio base on without proper prep. Most sand work here is not soil amendment, it is hardscape support, mortar mixing, paver joint fill, and pool bases where you need a consistent grain and no clay contamination. With mild temperatures nearly year round and growing zone 10a, there is no real frost heave risk to worry about once the sand is set, but contractors still work through the fall before winter rains slow outdoor pours.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this is the washed and finely screened sand that some regions call mason sand. It is finer and more uniform than concrete sand, which is what makes it workable for mortar mixing and consistent for paver joint fill or pool base applications.

Answer

How much sand do I need for paver joints on a mid size patio?

Joint fill uses much less volume than the full patio area, since sand only fills the gaps between pavers. One cubic yard covers about 324 square feet at a 1 inch depth, but for joints alone most patios need a fraction of a yard, measure your total joint length and width to estimate more precisely.

Answer

When is the best time to schedule a hardscape project with sand delivery?

Spring through fall is peak hardscape season here, with mild weather and no real frost concerns given our zone 10a climate. Winter rains starting after the first frost in December can slow outdoor mortar and paver work, so many contractors push to finish before then.

Answer

Do I need special access for a sand delivery?

A standard driveway or curbside spot with clear truck access works for most deliveries. Let us know if you have narrow access, low branches, or tight turns, since our trucks need reasonable clearance to place the load exactly where you need it.

Answer

Should I use sand or chip stone under my pavers?

Sand has traditionally been used for paver bedding, but clean chip stone is increasingly preferred because it locks together and resists pumping out under moisture and traffic over time. Many local contractors now use sand only for joint fill and choose chip stone for the bedding layer itself.

More delivery around Salinas, California

All Salinas, California landscape supply